ESP32-powered LED flight display
Flight Tracker Mach 2
FlightTrackerLED Mach 2 LED Flight Tracker Display
Track flights overhead or follow a specific flight by number on a handmade LED display. Multiple display modes, customizable settings, and free OTA updates.
- ESP32 Powered
- OTA Updates
- Customizable
Couldn't load pickup availability
What's inside
Built for flight tracking and beyond
Track individual flights by flight number, watch planes overhead in real time, or switch to one of the built-in display modes. Mach 2 runs on ESP32 and gets free OTA updates so it keeps improving after it arrives.
Track Any Flight
Enter a flight number and follow a specific flight in real time, or let it scan for aircraft passing through your area automatically.
Multiple Display Modes
Switch between apps, scenes, and visualizations. Clock, weather, custom text, and more are built right in.
Free OTA Updates
New features and improvements ship over the air. Your display keeps getting better long after it arrives.
Fully Customizable
Adjust brightness, filters, tracking zones, and display preferences. Make it fit your space exactly.
How it works
From unboxing to tracking
The Mach 2 connects to your Wi-Fi, pulls live flight data from ADS-B sources, and displays it on a 2,048-pixel LED matrix — no app required.
Plug in & connect
Power up with the included USB-C cable and 5V supply. Open the browser-based setup page to connect to your Wi-Fi — no app download needed.
Set your location
Enter your address or drop a pin to define your tracking zone. The display scans for flights within your configured area automatically.
Watch flights live
Aircraft data streams in real time from ADS-B sources. See flight numbers, airlines, altitude, speed, and aircraft type scroll across the LED matrix.
Track specific flights
Enter any flight number to follow a specific plane. The display locks on and shows its position, route, and status until it lands or leaves range.
What's in the box
Everything you need,
nothing you don't
LED Matrix Display
64x32 RGB LED panel with 2,048 individually addressable pixels, pre-installed in the enclosure and ready to go.
Handcrafted Wood Enclosure
Each enclosure is hand-built, sanded, and finished. Designed to look at home on a desk, shelf, or nightstand.
ESP32 Controller
Adafruit MatrixPortal S3 with Wi-Fi, USB-C, and 8MB flash. Pre-flashed with Flight Tracker firmware — just plug in and connect.
Power Supply & Cable
5V 5A DC adapter and USB-C cable included. Plug into any standard outlet and you're up and running.
Technical Specs
What's under the hood
